1. How to get a clearer effect
Since the VR lens will magnify the pixels, scratches, and dust on the phone screen, the following unclear phenomena can be solved accordingly: 1. The screen has obvious graininess: the pixel density of the mobile phone screen is lower than 500PPI, the graininess will be more obvious. 2. Diamond or rectangular grid: This is the grid line of the touch screen channel. Low-end mobile phones and non-original touch screens have poor anti-imaging technology, which will be more obvious by zooming in or viewing from a certain angle. 3. Partially irregular lines and spots: scratches, dust, etc. on the touch screen after zooming in. 4. Colored spots: mainly caused by uneven thickness of mobile phone protective film and light refraction caused by internal stress of the material. 5. Dim and unclear: Please adjust the visual acuity knob for nearsightedness 400 to farsightedness 200. If it exceeds, please adjust the vision after wearing glasses. Please clean the lens before use. Recommendations for use: Use a mobile phone with a resolution of 2560*1440 or above and a screen size of about 5.5 inches. Clean the screen of the mobile phone before using it. It is not recommended to film the mobile phone.
2. How to avoid ghosting
The phone is not flat and causes double images: the bottom of the phone is not level with the Z6 bracket after the horizontal screen, causing one end to be high and the other to be low. Please adjust the width of the bracket to a suitable position and place the phone at both ends. shadow Correct: Incorrect horizontal centering, ghosting Application software setting error causes ghosting: In most VR software settings, you can select the glasses model, please select "Xiao Zhai Z6" or "Xiao Zhai VR". If you can't find the above models of APP, you can select "cardboard 2". The wrong DPI parameters of the phone obtained by the software cause ghosting: Some Android phones have screen size, DPI and other parameters that are inconsistent with the actual parameters, causing the application to obtain screen size, DPI and other information that does not match the actual product, resulting in ghosting. Please download "Orange VR" to solve this kind of problems in "My→Settings→System Settings→Screen Settings→Select the correct screen size".
3. Connect the headset
Bluetooth wireless connection: 1. Press the power button on the Z6 to turn on the device, the blue indicator light flashes, indicating that it is in the standby state. 2. Turn on Bluetooth in the phone settings and search for Bluetooth audio devices. 3. Wireless version: XZ-Z6, the indicator light will turn blue when the connection is successful. 4. Wireless version: Wired connection is not supported, just use wireless connection, the K song experience is not as good as the professional version. 5. First check whether the Z6 is in a flashing blue light. If it does not mean that it is already connected to other devices, you can press and hold the volume + forcibly disconnect and then reconnect. 6. Check whether the Bluetooth device selected from the mobile phone is correct. Two devices will appear on the Android mobile phone in the professional version. Please do not connect the device with the end letter BLE. 7. Some mobile phone Bluetooth refresh problems need to be switched again to search or connect.
4. Comfortable to wear
After the phone is installed, follow the steps below to achieve a more comfortable effect: 1. Relax the headband on the top of the head, or adjust it first. 2. Turn the connecting ring of the horizontal headband first, so that the horizontal band is at the lower position of the back of the head, and adjust it until there is no obvious back pressure on the face. 3. Shrink the headband again to lift the body without overwhelming the nose. note: Be sure to adjust the horizontal headband at the back of the head first, and then adjust the top headband. If the headband is too short, it will cause the horizontal headband to slip up and make it easier to wear. If you don’t care about light leakage at the bridge of your nose, you can remove the soft nose bridge.
Product model: wireless version Farsightedness adjustment: hyperopia within 200°, nearsightedness within 400° FOV: 110° Mobile phone adaptation: 4.7-6.3inch full screen within 6.2inch, recommended 2K screen or more, support Android/IOS Control method: hover head control, handle control, one-touch touch (app support required)